G3516E Standard equipment
Air Inlet
Two-element single-stage air cleaner with enclosure and service indicator
Control Panels
EMCP II+
Cooling
Engine driven water pumps for jacket water and aftercooler
Jacket water and SCAC thermostats
ANSI/DN customer flange connections for JW inlet and outlet
Cat flanges on SCAC circuit
Exhaust
Dry exhaust manifolds, insulated and shielded
Center section cooled turbocharger with Cat flanged outlet
Individual exhaust port and turbocharger outlet wired to Integrated Tmeperature Sensing Module (ITSM) with GECM providing alarms and shutdowns
Cooling
Engine driven water pumps for jacket water and aftercooler
Jacket water and SCAC thermostats
ANSI/DN customer flange connections for JW inlet and outlet
Cat flanges on SCAC circuit
Fuel system
Electronic fuel metering valve
Throttle plate, 24V DC actuator, controlled by GECM
Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 4.5 to 34.5KPa to the engine fuel control valve
Generator
SR4B
Caterpillar's Digital Voltage Regulator (CDVR) with 3-phase sensing and KVAR/PF control
Reactive droop
Bus bar connections
Winding temperature detectors
Anti-condensation space heater
Starting/Charging
24V starting motors
Battery with cables and rack(shipped loose)
Battery disconnect switch
60A, 24V charging alternator (standard on 60Hz 1800 rpm only)
General
Paint - Caterpillar Yellow except rails and radiatorsgloss black
Crankshaft vibration damper and guard
Operation and maintenance manuals
Parts book
G3516E Optional equipment
Air Inlet
Mounting stand
Air cleaner with preleaner
Control Panels
Local alarm module
Remote annuciator
Remote Communications Module (PL1000T, PL1000E)
Cooling
Coolant level drain line with valves, fan with guard
Inlet/Outlet connections
Exhaust
Flange
Exhaust expander
Fuel System
Fuel filter
Gas pressure regulator
Generator
Medium and high voltage generators and attachment
Low voltage extension box
Cable access box
General
Crankcase explosion relief valve
Engine barring group
