COMPARE MODELS
Our product comparison allows for the review of up to 3 related models technical specifications at the same
time.
Electric Rope Shovels
7495 with HydraCrowd
ADD MODEL
ADD MODEL
Dipper Payload
120 ton (US)
Na
Na
Dipper Capacity
30.6-62.7 m3 (40-82 yd3)
Na
Na
Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified)
120 t
Na
Na
Note
Dependent on application and material density
Na
Na
Working Weight - With Dipper and Standard Links
3066000 lb
Na
Na
Ballast - Furnished By Customer
667150 lb
Na
Na
Note (1)
Optimal working ranges based on loading a Cat 795F AC truck.
Na
Na
Note (2)
*All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.
Na
Na
Crawler Dimensions - Overall Width 259.1 cm (102 in) Treads
38 ft
Na
Na
Crawler Dimensions - Overall Width 200.7 cm (79 in) Treads, Standard
36 ft
Na
Na
Hoist
A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
Na
Na
Ground Bearing Pressure - Note
Ground bearing pressure is dependent upon many factors
Na
Na
Upper Works Overall Width - Including Standard Walkways
41.9 ft
Na
Na
Ground Bearing Pressure - Total Effective Bearing Area (259.1 cm/102 in) Treads
46.6 m2 (298 kPa); 501.7 ft2 (43 psi)
Na
Na
Swing
Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
Na
Na
Planetary Propel
Dual-motor independent drive
Na
Na
Ground Bearing Pressure - Total Effective Bearing Area (200.7 cm/79 in) Treads - Standard
36 m2 (382 kPa); 386 ft2 (55 psi)
Na
Na
Type
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Na
Na
Components (1)
Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room
Na
Na
Components (2)
External FastFil from lower level
Na
Na
Power Requirements - Note
Other voltage options available to suit customer requirements
Na
Na
Drive
IGBT Acutrol drive system
Na
Na
Power Requirements - 50 Hz
6,000V, 6,600V, 7,200V, 11,000V
Na
Na
Power Requirements - Average Power Demand
945-1322 kW
Na
Na
Power Requirements - Voltage
3 phase, 50/60 Hz, 7,200V
Na
Na
Power Requirements - 60 Hz
7,200V, 13,800V
Na
Na
System Voltage - Nominal
50/60 Hz, 7,200V
Na
Na
Power Requirements - Peak power
3778 kW
Na
Na
Rope Data - Boom Suspension - No.
4
Na
Na
Rope Data - Boom Suspension - Diameter
3.25 in
Na
Na
Rope Data - Note
High impact ropes available as an option
Na
Na
Rope Data - Dipper Trip - No.
1
Na
Na
Rope Data - Hoist - No.
2
Na
Na
Rope Data - Hoist - Diameter
2.75 in
Na
Na
Rope Data - Dipper Trip - Diameter
0.75 in
Na
Na
Crowd (1)
HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.
Na
Na
Crowd (2)
(Optional) Rope Crowd, the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Na
Na
Dipper Capacities
30.6-62.7 m3 (40-82 yd3)
Na
Na
Maximum Dumping Height
28.9 ft
Na
Na
Operating Weight
3066000 lb
Na
Na
Cutting Radius - Maximum
80 ft
Na
Na
Revolving Frame Tail Swing Radius
30.5 ft
Na
Na
Cutting Height - Maximum
53.5 ft
Na
Na
Radius of Level Floor
56.1 ft
Na
Na
Dumping Height - With Clearance to Open Dipper Door
28.9 ft
Na
Na