COMPARE MODELS
Our product comparison allows for the review of up to 3 related models technical specifications at the same
time.
Three Axle Articulated Trucks
740 GC
ADD MODEL
ADD MODEL
Engine Model
Cat® C15
Na
Na
Bore
5.4 in
Na
Na
Stroke
6.75 in
Na
Na
Displacement
926 in³
Na
Na
Emissions
The C15 engine emits either Tier 2/Stage II or Tier 3/Stage IIIA equivalent emissions.
Na
Na
Net Power - SAE J1349
434 HP
Na
Na
Net Power - ISO 14396
443 HP
Na
Na
Gross Power - SAE J1995
449 HP
Na
Na
Peak Engine Torque Gross (SAE J1995)
1711 ft·lbf
Na
Na
Peak Engine Torque Net (SAE J1349)
1670 ft·lbf
Na
Na
Peak Engine Torque Speed
1200 r/min
Na
Na
No Engine De-rating Below
10000 ft
Na
Na
Engine Model - Either U.S. EPA Tier 2/EU Stage II or U.S. EPA Tier 3/EU Stage IIIA equivalent
Cat C15
Na
Na
Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Na
Na
Note (1)
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Na
Na
Note (3)
Net power when the fan is at maximum speed is 324 kW (434 hp) per the SAE reference conditions.
Na
Na
Rated Payload
40 ton (US)
Na
Na
Heaped (SAE 2:1)
29.7 yd³
Na
Na
Struck
22.2 yd³
Na
Na
Tailgate Heaped SAE 2:1
31.9 yd³
Na
Na
Tailgate Struck
23.4 yd³
Na
Na
Forward - 1
4 mile/h
Na
Na
Forward - 2
5.3 mile/h
Na
Na
Forward - 3
7.3 mile/h
Na
Na
Forward - 4
9.2 mile/h
Na
Na
Forward - 5
12.2 mile/h
Na
Na
Forward - 6
14.9 mile/h
Na
Na
Reverse - 1
4.2 mile/h
Na
Na
Forward - 9
35.7 mile/h
Na
Na
Forward - 7
20.6 mile/h
Na
Na
Reverse - 2
9.8 mile/h
Na
Na
Forward - 8
24.7 mile/h
Na
Na
Interior Cab
72 dB(A)
Na
Na
Rear Axle - Loaded
50750 lb
Na
Na
Center Axle - Empty
14791 lb
Na
Na
Center Axle - Rated Load
36451 lb
Na
Na
Total - Loaded
150480 lb
Na
Na
Front Axle - Loaded
48488 lb
Na
Na
Front Axle - Rated Load
7128 lb
Na
Na
Rear Axle - Rated Load
36451 lb
Na
Na
Total - Empty
70451 lb
Na
Na
Total - Rated Load
80030 lb
Na
Na
Rear Axle - Empty
14299 lb
Na
Na
Center Axle - Loaded
51242 lb
Na
Na
Front Axle - Empty
41361 lb
Na
Na
Fuel Tank
145.3 gal (US)
Na
Na
Cooling System
23.7 gal (US)
Na
Na
Engine Crankcase
13.7 gal (US)
Na
Na
Steering/Hoist Hydraulic System
36.9 gal (US)
Na
Na
Brake Cooling Tank
17.7 gal (US)
Na
Na
Final Drive - Each
1.3 gal (US)
Na
Na
Transmission - OTG
19.8 gal (US)
Na
Na
Axles - Each
15.8 gal (US)
Na
Na
Raise Time
12 s
Na
Na
Lower Time
12 s
Na
Na
Lock to Lock
4.75 seconds @ 60 rpm
Na
Na
Brakes
ISO 3450 – 2011
Na
Na
Cab - FOPS
ISO 3449 Level II – 2005
Na
Na
Cab - ROPS
ISO 3471 – 2008
Na
Na
Steering
ISO 5010 – 2007
Na
Na
Type
High strength Brinell HB450 wear resistant steel
Na
Na
Turning Dimensions - Steer Angle - Left/Right
45°
Na
Na
Turning Dimensions - Aisle Width
220 in
Na
Na
Turning Dimensions - Inside Radius
156 in
Na
Na
Note
An optimum system match gives you a major productivity advantage. The 740 GC is an excellent match for the Cat 374F and 352F Hydraulic Excavators; and Cat 972M, 966M, and 962M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Na
Na
Turning Dimensions - Clearance Radius
330 in
Na
Na
Turning Dimensions - SAE Turning Radius
303 in
Na
Na
Side Plates
0.43 in
Na
Na
Front Plate
0.28 in
Na
Na
Base Plate
0.51 in
Na
Na
Wheel Loader: 966M - Passes
4–5
Na
Na
Hydraulic Excavator: 352F - Passes
5–6
Na
Na
Wheel Loader: 972M - Passes
3
Na
Na
Wheel Loader: 962M - Passes
5
Na
Na
Hydraulic Excavator: 374F - Passes
3–4
Na
Na