Jallad | Products

Gross Power - SAE J1995

3500 HP

Standard Gross Power - SAE J1995

3500 HP

Engine Model

Cat® C175-16

Optional Gross Power - SAE J1995

3100 HP

Optional Gross Power - SAE J1995 (Option 2)

2750 HP

Rated Speed

1800 r/min

Net Power - SAE J1349

3405 HP

Emissions Rating

Fuel Optimized

Bore

6.9 in

Stroke

8.7 in

Displacement

5187 in³

Note (1)

DEF Tank only available for EPA Tier 4 / EU Stage V engine option.

Note (2)

Power raise in both stages; power down in both stages possible.

Note (3)

Automatic body-lower modulation reduces impact on frame.

Nominal Rated Payload

327 ton (US)

Rated Gross Machine Weight

1150000 lb

Chassis Weight

426237 lb

Body Weight

64346 lb

Note (4)

Tier 4 Final / Stage V chassis weight: 426312 lb (193372 kg)

Total Reduction Ratio

35:01:00

Top Speed - Loaded

37 mile/h

Generator/Alternator

Brushless, engine mounted, dual bearing

Controls

IGBT Inverter Technology, air cooled, pressurized cabinet with filtration

Wheel Motor

High-torque AC induction, rear axle mounted

Cooling System

211 gal (US)

Standard Tires

53/80 R63

Rims

36" x 63"

Service Brakes

Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated

Front Wet Disc Brake Surface Area

20378 in²

Rear - Wet Disc Brake Surface Area

30750 in²

Standards

ISO 3450:2011

Parking Brake

Four-corner, Multi-disc, Spring applied, Hydraulically Released

Load Brake

Rear service brakes

Dynamic Retarding Power - Continuous

5480 HP

Front Axle - Empty

49 %

Rear Axle - Empty

51 %

Front Axle - Loaded

33 %

Rear Axle - Loaded

67 %

Pump Flow - High Idle (HAA at 1,800 rpm)

221 gal/min

Pump Flow - High Idle (LAA at 1,960 rpm)

240 gal/min

Relief Valve Setting - Raise

3029 psi

Body Raise Time - High Idle

24 s

High Idle Body Lower Time - Float

20 s

Total Cycle Time

44 s

Struck

108-133 m³ (142-175 yd³)

Heaped (SAE 2:1)

180-222 m³ (236-290 yd³)

Dump Body Plate Thickness Varies Depending on Body Selection - Floor Plate

0.63 in

Dump Body Plate Thickness Varies Depending on Body Selection - Front Plate

0.35 in

Dump Body Plate Thickness Varies Depending on Body Selection - Side Plate

0.31 in

Dump Body Plate Thickness Varies Depending on Body Selection - Canopy Plate

0.2 in

Note

Gross Machine Operating Weight is 521 631 kg (1,150,000 lb).

Fuel Tank

1300 gal (US)

Crankcase

82 gal (US)

Final Drive - Each

67 gal (US)

Hydraulic Tank

296 gal (US)

Hydraulic System - Including Tank

385 gal (US)

Diesel Exhaust Fluid Tank

100 gal (US)

ROPS Standards

ROPS (Rollover Protective Structure) meets ISO 3471:1994.

FOPS Standards

FOPS (Falling Object Protective Structure) meets ISO 3449:1992.

Sound Standards (1)

The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 75 dB(A) for cab offered by Caterpillar when properly installed, maintained, and tested with doors and windows closed.

Sound Standards (2)

Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.

Steering Standards

ISO 5010:2007

Steer Angle

39 °

Height - Top of ROPS

22.25 ft

Overall Length

50.75 ft

Wheel Base

21.83 ft

Rear Axle - Tail

15.5 ft

Ground Clearance

2.67 ft

Dump Clearance

3 ft

Loading Height - Empty

22.92 ft

Overall Height - Body Raised

48.42 ft

Centerline Front Tire Width

23 ft

Front Axle Clearance

3.17 ft

Canopy Width (without optional rock deflectors)

29.75 ft

Outside Body Width

29.75 ft

Inside Body Width

28.08 ft

Front Canopy Height

26.33 ft

Rear Axle - Clearance

3.08 ft

Centerline of Rear Dual Tire Width

18.75 ft

Overall Tire Width

28.67 ft

Overall Canopy Width

31.5 ft

Engine

Weights - Approximate

Final Drives

AC Drive System

Tires

Braking System

Weight Distributions - Approximate

Body Hoists

Capacity - HE Body - 100% fill factor

Service Refill Capacities

ROPS

Sound

Steering

Dimensions (Approximate)