Specification
Value
Net Power
23.6 HP
Engine Model
C1.1 Turbo
Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC
23.6 HP
Bore
3 in
Displacement
69 in³
Emissions
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Stroke
3.2 in
Gross Power - 2,400 rpm - SAE J1995:2014
24.7 HP
Specification
Value
Operating Weight
6725 lb
Minimum Operating Weight with Canopy*
5645 lb
Maximum Operating Weight with Canopy**
6450 lb
Minimum Operating Weight with Cab*
5909 lb
EU: CE Plate Weight with Canopy***
5942 lb
EU: CE Plate Weight with Cab***
6174 lb
Note (2)
**Maximum Weight is based on steel tracks, operator, full fuel tank, long stick, blade, bucket and extra counterweight.
Note (1)
*Minimum Weight is based on rubber tracks, operator, full fuel tank, standard stick, blade, bucket and no extra counterweight.
Maximum Operating Weight with Cab**
6725 lb
Note (3)
***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket.
Specification
Value
Long Stick
33 lb
Steel Tracks
221 lb
Cab
276 lb
Counterweight (extra)
551 lb
Counterweight (light)
221 lb
Specification
Value
Ground Pressure - Maximum Weight
4.2 psi
Ground Pressure - Minimum Weight
3.5 psi
Travel Speed - Low
1.6 mile/h
Gradeability - Maximum
30 degrees
Maximum Traction Force - High Speed
3507 lbf
Travel Speed - High
2.8 mile/h
Maximum Traction Force - Low Speed
6025 lbf
Specification
Value
Hydraulic System
9.2 gal (US)
Hydraulic Tank
4.8 gal (US)
Fuel Tank
11.9 gal (US)
Engine Oil
1.1 gal (US)
Cooling System
1.1 gal (US)
Specification
Value
Digging Force - Stick - Standard
3102 lbf
Auxiliary Circuit - Primary - Pressure
3553 psi
Operating Pressure - Swing
2553 psi
Auxiliary Circuit - Secondary - Flow
7 gal/min
Auxiliary Circuit - Primary - Flow
17 gal/min
Auxiliary Circuit - Secondary - Pressure
3553 psi
Operating Pressure - Equipment
3553 psi
Digging Force - Stick - Long
2765 lbf
Digging Force - Bucket
5238 lbf
Operating Pressure - Travel
3553 psi
Pump Flow at 2,400 rpm
26 gal/min
Type
Load Sensing Hydraulics with Variable Displacement Piston Pump
Note
Flow and pressure are not combinable. Under load, as flow rises pressure goes down.
Specification
Value
Machine Swing Speed
9 r/min
Boom Swing - Left
75 Degrees
Boom Swing - Right
50 Degrees
Specification
Value
Height
12.6 in
Width
61.8 in
Specification
Value
Top Guard
ISO 10262:1998 (Level I)
Tip Over Protective Structure (TOPS)
ISO 12117:1997
Roll Over Protective Structure (ROPS)
ISO 12117-2:2008
Specification
Value
Operator Sound Pressure (ISO 6396:2008)
78 dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)
94 dB(A)
Note
European Union Directive “2000/14/EC”
Specification
Value
Overall Shipping Length*
166.9 in
Boom In Reach
67.3 in
O/A Shipping Height
97.6 in
Swing Bearing - Height
22 in
Stick Length
41.7 in
Maximum Reach
183.5 in
Maximum Dump Clearance
116.1 in
Maximum Dig Height
168.1 in
Tail Swing without Counterweight
30.5 in
Tail Swing with Extra Counterweight
35 in
Boom Swing - Right
32.7 in
O/A Undercarriage Length
79.1 in
Vertical Wall
73.6 in
Note
*Overall Shipping Length depends on blade position during shipment.
Maximum Reach - Ground Level
177.6 in
Dig Depth
98.8 in
Track Belt/Shoe Width
11.8 in
Maximum Blade Height
15.6 in
Maximum Blade Depth
20.3 in
Boom Swing - Left
23.8 in
Ground Clearance
12.2 in
Boom Height - Shipping Position
61.4 in
Tail Swing - with Light Counterweight
33.3 in
Specification
Value
Dig Depth
106.7 in
Boom Height - Shipping Position
65 in
Boom Swing - Right
32.7 in
Maximum Reach - Ground Level
185.4 in
Maximum Blade Height
15.6 in
Maximum Reach
190.9 in
Boom Swing - Left
23.8 in
Maximum Blade Depth
20.3 in
O/A Shipping Height
97.6 in
Maximum Dig Height
172.8 in
Stick Length
49.6 in
Tail Swing without Counterweight
30.5 in
Boom In Reach
68.1 in
Maximum Dump Clearance
120.9 in
Swing Bearing - Height
22 in
Vertical Wall
80.7 in
O/A Undercarriage Length
79.1 in
Ground Clearance
12.2 in
Track Belt/Shoe Width
11.8 in
Overall Shipping Length*
168.5 in
Note
*Overall Shipping Length depends on blade position during shipment.
Tail Swing - with Extra Counterweight
35 in
Track Width
61.8 in
Tail Swing - with Light Counterweight
33.3 in
Specification
Value
Recyclability
95%
- Choose either a canopy or a sealed and pressurized cab which can be equipped with air conditioning, adjustable wrist rests, and a suspension seat option to help keep you working comfortably all day long.
- Controls are easy to use and the intuitive Next Generation LCD monitor provides easy to read machine information. An advanced touchscreen monitor can also be equipped.
- Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls to move the machine and to operate the blade. The benefit of less effort and improved control is in your hands!
- Strong lift and dig performance helps you get the job done faster. The compact radius design and retractable undercarriage let you access and work in the tightest areas. Dozer float allows for easy clean up.
- Your safety is our top priority. The Cat mini excavator is designed to help keep you safe on the job. Courtesy work lights and a fluorescent retractable seat belt are just a couple of the safety features we’ve built into the machine.
- Maintenance is quick and easy on the Cat mini excavator. Routine check points are easy to access at ground level through the side doors. The unique tilt up cab or canopy lets you reach additional service areas when needed.
- Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat mini excavator was designed with reducing your operating costs in mind.
- Your Cat dealer is here to help you reach your business goals. From providing equipment solutions to operator training to service needs and beyond, your Cat dealer is ready to help.
- The Cat® C1.1 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
- Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
- Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
- Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
- The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
- Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
- Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
- Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)
A11
A23
500 mm (20 in)
300 mm (12 in)
1000 mm (39 in)
500 mm (20 in)
460 mm (18 in)
600 mm (24 in)
260 mm (10 in)
700 mm (28 in)
300 mm (12 in)
450 mm (18 in)
500 mm (20 in)
600 mm (24 in)
400 mm (16 in)
450 mm (18 in)
700 mm (28 in)
500 mm (20 in)
300 mm (12 in)
460 mm (18 in)
260 mm (10 in)
400 mm (16 in)
500 mm (20 in)
1000 mm (39 in)
1200 mm (47 in)
1200 mm (47 in)
1000 mm (39 in)
800 mm (32 in)
1200 mm (47 in)
1000 mm (39 in)
1100 mm (43 in)
1100 mm (43 in)
250 mm (10 in)
305 mm (12 in) 2 Ton, Pin On
406 mm (16 in) 2 Ton, Pin On
559 mm (22 in) 2 Ton, Pin On
CW-05 Manual 2 Ton Mini Excavators
2 Ton Mini Excavators Manual
B2
B2s
346 mm (14 in) 5 Teeth/2 Tines
VisionLink®
CVP16
400 mm (16 in)
400 mm (16 in)
700 mm (28 in)
300 mm (12 in)
500 mm (20 in)
600 mm (24 in)
300 mm (12 in)
600 mm (24 in)
700 mm (28 in)