627
The principal choice for moving material on an earthmoving site is the Cat®
627 Wheel Tractor-Scraper. Twin-powered for high rollingresistance and steep grades, this machine is engineered to work effectively in a wide range of conditions and material types. Whether traveling through sand, clay, or shot rock, it’s specifically designed to fit an earthmover’s needs for today‘s and
tomorrow’s work.
627 Wheel Tractor-Scraper. Twin-powered for high rollingresistance and steep grades, this machine is engineered to work effectively in a wide range of conditions and material types. Whether traveling through sand, clay, or shot rock, it’s specifically designed to fit an earthmover’s needs for today‘s and
tomorrow’s work.
180° Curb-to-Curb Turning Width
38.71 ft
Scraper Capacity - Heaped
24.0 yd³
Maximum Depth of Spread
21.3 in
Specification
Value
180° Curb-to-Curb Turning Width
38.71 ft
Scraper Capacity - Heaped
24.0 yd³
Maximum Depth of Spread
21.3 in
Maximum Depth of Cut
12.4 in
Width - Cut
10.3 ft
Top Speed - Loaded
33.5 mile/h
Rated Load
26 127 kg (57,610 lb); 26.19 tonnes (28.81 tons)
Fuel Tank Refill Capacity - Scraper
336.0 gal (US)
Scraper Capacity - Struck
17.1 yd³
Overall Width
11.71 ft
Tires - Scraper
33.25R29**E3
Overall Shipping Height
13.22 ft
Tires - Tractor Drive
33.25R29**E3
Specification
Value
Rated Engine RPM - Scraper
2150.0 r/min
Flywheel Power - Tractor
407.0 HP
Note (1)
C13 engine emits equivalent to U.S. EPA Tier 2/EU Stage II or U.S. EPA Tier 3/EU Stage III.
Note (2)
C9.3 engine emits equivalent to U.S. EPA Tier 2/EU Stage II or U.S. EPA Tier 3/EU Stage III.
Flywheel Power - Scraper
290.0 HP
Rated Engine RPM - Tractor
2000.0 r/min
Engine Model - Scraper
Cat C9.3
Engine Model - Tractor
Cat C13
Specification
Value
Flywheel Power - Tractor/Scraper
304 kW (407 hp)/216 kW (290 hp)
Specification
Value
Scraper Capacity - Heaped
24.0 yd³
Specification
Value
Top Speed - Loaded
33.5 mile/h
Specification
Value
Fuel Tank
336.03 gal (US)
Cooling System - Tractor
11.89 gal (US)
Crankcase - Scraper
7.3968 gal (US)
Hydraulic System
21.926 gal (US)
Transmission System - Scraper
12.944 gal (US)
Cooling System - Scraper
16.114 gal (US)
Crankcase - Tractor
8.08 gal (US)
Transmission System - Tractor
24.76 gal (US)
Specification
Value
Width - Overall Machine
141.1 in
Width - Tractor
133.1 in
Width - Inside of Bowl
120.0 in
Width - Outside Rear Tires
128.9 in
Height - Overall Shipping
158.6 in
Height - Top of Cab
142.6 in
Ground Clearance - Tractor
21.9 in
Front of Tractor to Front Axle
122.8 in
Axle to Vertical Hitch Pin
21.3 in
Height - Scraper Blade Maximum
20.5 in
Wheel Base
314.9 in
Rear Axle - Rear of Machine
114.1 in
Width - Rear Tire Centers
90.2 in
Length - Maximum (Push-Pull)
613.2 in
Length - Overall Machine - Standard
551.8 in
Width - Overall Machine - Ladder Down
149.2 in
Specification
Value
Operating Weight - Empty
90213.0 lb
Overall Length
45.9 ft
Specification
Value
Overall Length - With Bail Down
51.1 ft
Operating Weight - Empty
92980.0 lb
Specification
Value
Exterior Sound Level
The exterior sound power level for the standard machine (ISO 6393) is 116 dB(A).
ROPS/FOPS
Meets ISO standards
Specification
Value
Reverse Alarm
ISO 9533:2010
Seat Belt
SAE J386:JUN1985
Steering System
ISO 5010:2007
Brakes
ISO 3450:2011
Rollover Protection Structure (ROPS)
ISO 3471:2008 for up to 17 084 kg (37,664 lb)
Falling Object Protective Structure (FOPS)
ISO 3449:2005 Level II
Specification
Value
Transmission Gear - First
3.1 mile/h
Transmission Gear - Eighth
33.5 mile/h
Transmission Gear - Second
5.5 mile/h
Transmission Gear - Reverse
5.7 mile/h
Transmission Gear - Seventh
24.8 mile/h
Transmission Gear - Fifth
13.6 mile/h
Transmission Gear - Third
7.5 mile/h
Transmission Gear - Sixth
18.4 mile/h
Transmission Gear - Fourth
10.1 mile/h
Specification
Value
Bowl Lower
3.5 s
Bail Lower
3.2 s
Apron Lower
3.8 s
Bail Raise
1.8 s
Apron Raise
2.95 s
Bowl Raise
3.0 s
Ejector Retract
6.7 s
Ejector Extend
5.2 s
