Pin Grabber Coupler (315-Linkage): 455-3916
Cat® Pin Grabber Couplers bring another level of productivity and versatility to your operation. Add the ability to change attachments quickly and conveniently to your operation, while staying aligned to worldwide safety standards.
Minimum Carrier Weight
15 ton (US)
Maximum Carrier Weight
18 ton (US)
Weight
659 lb
Specification
Value
Minimum Carrier Weight
15 ton (US)
Maximum Carrier Weight
18 ton (US)
Weight
659 lb
Attachment Pin Diameter - Stick (Front)
2.76 in
Attachment Pin Diameter - Link (Rear)
2.76 in
Pin Spread - Minimum
15.71 in
Pin Spread - Maximum
18.50 in
Lifting Eye Working Load Limit
22046 lb
Width - Machine Interface
18.11 in
Width - Attachment Interface
10.67 in
- Get back to work faster with the capability to change attachments in seconds
- Attachments are shareable between similar sized excavators
- Couplers are weighted to handle big payloads, so you do not have to compromise on bucket size
- Do more with your equipment. Added versatility allows you to switch easily from digging, grading, material handling, compacting soil, breaking rocks, and more.
- Trenching widths available for certain coupler sizes:
- Saves backfill time and material
- Keeps the widest part of the coupler inside the digging width of 24- and 30-inch buckets
- Fully compatible with wider buckets and the same attachments as the standard models
- Pin Grabber Performance Buckets – recessed pins for an even further reduced tip radius
- Pick up buckets in reverse position to clean out square corners
- Redundant locking system secures attachments:
- Primary wedge – Blocks pin movement like a deadbolt lock
- Secondary latch – Indicates to operator if coupler is either open or closed. Hinged to clamp the pin in place.
- Two spring-loaded arms – Assure secondary latch stays closed
- In the event you experience a loss of hydraulic pressure, redundant locking systems keep attachment in place
- Short coupler profile maintains tight tip radius, breakout force, and digging power
- Cast frame pieces made from abrasion-resistant steel
- Integrated, centered lift eye handles wide range of shackle, chain, and cable. Its interior shape keeps loads stable.
- Couplers without a lift eye are available in Japan to meet local lifting restrictions.
- Visual and audible indicate to operator attachments are secure to the coupler.
- Greasing block provides a primary and easily accessible grease point.
- Operating procedures are simple and intuitive.
- Compliant with worldwide safety standards: ISO13031, EN474, and AS 4772:2008.
- Simplify on-the-job maintenance and improve reliability with the debris shield covering and protecting critical coupler components.
- Never waste time looking for your couplers again. Cat asset tracking is available on select Pin Grabber Couplers.
- Track your entire fleet of attachments and machines from one source. Couplers with asset tracking can be viewed in VisionLink®alongside Product Link™subscribed equipment.
- Keep your assets secure. Couplers with an asset tracker send an alert if they leave an easy-to-setup site boundary.
G312 GC Demolition & Sorting Grapple: 587-8713
G313 GC Demolition & Sorting Grapple: 587-8718
G314 Demolition & Sorting Grapple: 587-8963
G313 GC Demolition & Sorting Grapple: 587-8719
G318 WH Demolition & Sorting Grapple: 587-8970
G318 WH Demolition & Sorting Grapple: 587-8975
M317D2
318D2 L (2017)
G312 GC Demolition & Sorting Grapple: 587-8715
G317 GC Demolition & Sorting Grapple: 587-8720
G317 GC Demolition & Sorting Grapple: 587-8721